Back
Return
Biography
Dr. Shafique Khan

Coordinator, Materials and Manufacturing Group

King Fahd University of Petroleum and Minerals, Saudi Arabia

Associate Professor


Email: skhan@kfupm.edu.sa


Qualifications


2003 PhD, Mechanical Engineering, Washington State University, Pullman, WA, USA

1999 MS, Mechanical Engineering, King Fahd University of Petroleum and Minerals, Dhahran, Saudi Arabia

1996 BS, Mechanical Engineering, University of Engineering and Technology, Lahore, Pakistan


Publications

  1. Khan, S. M. A., Merah, N. and Adinoyi, M. J., "3D effects on crack front core regions, stress intensity factors and crack initiation angles", Int. J. Solids & Struct., vol. 50(9), pp. 1449-1459, 2013.
  2. Khan, S. M. A., "Crack front fields in a mixed mode I-II single edge-notched tension specimen: Effect of the thickness", Struct. Eng. Mech., vol. 42, pp. 701-713, 2012.
  3. Arif, A. F. M., Al-Nassar, Y. N., Al-Qahtani, H., Khan, S. M. A., Anis, M., Eleiche, A. M., Inam, M., Al-Nasri, N. and Al-Muslim, H. M., "Optimization of Pipe Repair Sleeve Design", ASME J. Pressure Vessel Technology, vol. 134(5) 051702, 2012.
  4. Albinmousa, J., Merah, N. and Khan, S. M. A., "A model for calculating geometry factors for a mixed-mode I-II single edge notched tension specimen", Technical Note, Eng. Fracture Mech., vol. 78, pp. 3300-3307, 2011.
  5. Khan, S. M. A., "Stress distributions in a horizontal pressure vessel and the saddle supports", Int. J. Pressure Vessels & Piping, vol. 87, pp. 239-244, 2010.
  6. Yilbas, B. S., Khan, S. M. A., Raza, K., Keles, O., Ubeyli, M., Demir, T. and Karakas, M. S., "Laser cutting of 7050 Al alloy reinforced with Al2O3 and B4C composites", Int. J. Adv. Manuf. Tech., vol. 50, pp. 185-193, 2010.
  7. Khan, S. M. A. and Khraisheh, M. K., "The anisotropic R-criterion for crack initiation", Eng. Fracture Mech., vol. 75, pp. 4257-4278, 2008.
  8. Yilbas, B. S., Shuja, S. Z., Khan, S. M. A. and Aleem, A., "Laser melting of carbide tool surface: Model and experimental studies" Applied Surface Science, vol. 255, pp. 9396-9403, 2009.
  9. Khan, S. M. A., Zbib, H. M. and Hughes, D. A., "Modeling planar dislocations boundaries using multi-scale dislocation dynamics plasticity", Int. J. Plasticity, vol. 20, pp. 1059-1092, 2004.
  10. Khan, S. M. A. and Khraisheh, M. K., "A new criterion for mixed mode fracture initiation based on the crack tip plastic core region", Int. J. Plasticity, vol. 20, pp. 55-84, 2004.
  11. Zbib, H. M., Shehadeh, M., Khan, S. M. A. and Karami, G., “Multiscale dislocation dynamics plasticity”, Int. J. Multiscale Comp. Eng., vol. 1(1), pp. 73-89, 2003.
  12. Hughes, D. A., Khan, S. M. A., Godfrey, A. and Zbib, H. M., "Internal structures of deformation induced planar dislocation boundaries", Materials Science and Engineering A, vol. 309-310, pp.220-226, 2001.
  13. Khan, S. M. A. and Khraisheh, M. K., "Analysis of mixed mode crack initiation angles under various loading conditions", Eng. Fracture Mech., vol. 67, pp. 397-419, 2000.
  14. Yilbas, B. S., Shuja, S. Z. and Khan, S. M. A., "Laser repetitive pulse heating of tool surface" Optics Laser Tech., vol. 43, pp. 754-761, 2011.
  15. Arif, A. F. M., Al-Nassar, Y. N., Al-Qahtani, H., Khan, S. M. A., Anis, M., Eleiche, A. M., Inam, M., Al-Nasri, N. I. and Al-Muslim, H. M., "Optimization of pipe repair sleeve design", ASME PVP, Design & Analysis of Piping & Piping Components II, 2011.
  16. Khan, S. M. A., "Initial investigation into optimizing design of a pressure vessel saddle", ASME PVP, Design & Analysis of Pressure Vessels, Heat Exchangers and Components, 2008.
  17. Khan, S. M. A. and Levine, L. E., "Multi-scale discrete dislocation plasticity analysis: Application to nano-indentation", NSTI-Nanotech, vol. 1, pp. 649-652, 2006.
  18. Khan, S. M. A. and Khraisheh, M. K., "Predicting mixed mode crack initiation angles in anisotropic materials using the shape of the crack tip core region", ASME PVP Fatigue, Fracture, and Damage Analysis, vol. 443(2), pp. 105-113, 2002.
  19. Khan, S. M. A., Zbib, H. M. and Hughes, D. A., "Stress patterns of deformation Induced planar dislocation boundaries", Mat. Res. Soc. Symp. Proc. vol. 683E.
  20. Khan, S. M. A. and Khraisheh, M. K., "The effect of the crack tip core region on the crack initiation angles under mixed mode loading", ASME PVP Fatigue, Fracture, and Damage Analysis, vol. 404, pp. 45-54, 2000.

Expertise

Computational mechanics/modeling/simulation, Multi-scale modeling of material behavior, Finite element analysis, Dislocation theory, Discrete dislocation dynamics, Fracture mechanics, Crystal plasticity and defects, Nanocomposites, Forming of Metals and Alloys


Profile Details

Last Updated: October 2013

Reference this profile directly: http://faculty.kfupm.edu.sa/me/skhan