Prof. Alicia Esther Ares

Department of Materials Science in Chemical Engineering

National University of Misiones, Argentina



2007 Professor, National University of Misiones, Argentina, Chemical and Natural Sciences

2000 Ph.D., Institute of Technology (IT)

1997 M.Sc., Institute of Technology (IT), Science and Technology of Materials


  1. María Laura Vera, Miguel ángel Alterach Mario Roberto Rosenberger, Diego Germán Lamas, Carlos Enrique Schvezov, Alicia Esther Ares, CHARACTERIZATION OF TiO2 NANOFILMS OBTAINED BY SOL-GEL AND ANODIC OXIDATION, Nanomaterials and Nanotechnology. Número ISSN: 1847-9804. Editorial: INTECH. . 2014. DOI: 10.5772/58522.
  2. Alejandra Silvina Román, Claudia Marcela Méndez and Alicia Esther Ares, CORROSION RESISTANCE OF Al-Cu ALLOYS IN FUNCTION OF THE MICROSTRUCTURE, Materials Science Forum. Volumen: Vols. 783-786. Páginas 100-107. Número ISSN: 0255-5476. Editorial: Trans Tech Publications. 2014 6/56
  3. María Laura Vera, Evelina Linardi, Liliana Lanzani, Claudia M. Mendez, Carlos E. Schvezov, Alicia E. Ares, CORROSION RESISTANCE OF TiO2 ANODIC COATINGS ON Ti-6Al-4V, Materials and Corrosion - Werkstoffe und Korrosion.DOI: 10.1002/maco.201407988. Número ISSN: 1521-4176. Editorial: Wiley. 2014.
  4. Alicia E. Ares,  UNIDIRECTIONAL SOLIDIFIED Zn-Al-Si-Cu ALLOYS: COLUMNAR-TO-EQUIAXED TRANSITION (CET), International Journal of Engineering and Innovative Technology, Volumen: 3, Issue 9, Páginas: 285-289. Número ISSN: 2277-3754. Editorial: IJEIT. 2014.
  5. N.S. Zadorozne, C.M.Giordano, R.B. Rebak, A.E. Ares and R.M. Carranza, STRESS CORROSION CRACKING OF NICKEL ALLOYS IN BICARBONATE AND CHLORIDE SOLUTIONS, Corrosion Journal. Páginas: 420-432, Número ISSN: 0010-9312. Editorial: NACE International. 2015.
  6. María Laura Vera, Mario Roberto Rosenberger, Carlos Enrique Schvezov, Alicia Esther Ares, TITANIUM DIOXIDE CRYSTALLINE COATINGS ON TI-6AL-4V ALLOY BY COMBINING ANODIC OXIDATION TECHNIQUE AND HEAT TREATMENTS, International Journal of Biomaterials. Número ISSN: 1687-8795. Editorial: Hindawi Publishing Corporation. Volume 2015 (2015), Article ID 395657, 9 pages.
  7. María Laura Vera, Mario Roberto Rosenberger, Carlos Enrique Schvezov, Alicia Esther Ares, WEAR RESISTANCE OF ANODIC TITANIUM DIOXIDE NANO-COATINGS PRODUCED ON Ti-6Al-4V ALLOY, Nanomaterials and Nanotechnology. Número ISSN: 1847-9804. Editorial: INTECH. DOI: 10.5772/60069.2015.
  8. María L. Vera, Jonathan Schuster, Mario R. Rosenberger, Haydee Bernard, Carlos E. Schvezov, Alicia E. Ares, EVALUATION OF THE HAEMOCOMPATIBILITY OF TiO2 COATINGS OBTAINED BY ANODIC OXIDATION OF Ti-6Al-4V,Procedia Materials Science. Volumen: 8, Páginas: 366-374. Número ISSN: 2211-8128. Editorial: Elsevier. 2015.
  9. María Laura Vera, Carlos Enrique Schvezov, Eduardo Heredia, Alicia Esther Ares, TiO2 COATINGS IN ALKALINE ELECTROLYTES USING ANODIC OXIDATION TECHNIQUE, Alex Iván Kociubczyk, Procedia Materials Science. Volumen: 8, Páginas: 65-72. Número ISSN: 2211-8128. Editorial: Elsevier. 2015.
  10. Wilky Desrosin, Lucía Boycho, Verónica Scheiber, Claudia Marcela Méndez, Carlos Enrique Schvezov, Alicia Esther Ares, EVOLUTION OF METALLOGRAPHIC PARAMETERS DURING HORIZONTAL UNIDIRECTIONAL SOLIDIFICATION OF Zn-Sn ALLOYS, Procedia Materials Science. Volumen: 8, Páginas: 968-977. Número ISSN: 2211-8128. Editorial: Elsevier. 2015.
  11. Natalia Silvina Zadorozne, Mabel Giordano, Raúl Rebak, Alicia Esther Ares, Ricardo Mario Carranza, ANODIC BEHAVIOR OF ALLOY 22 IN BICARBONATE MEDIA: EFFECT OF ALLOYING, Procedia Materials Science. Volumen: 8, Páginas: 510-518. Número ISSN: 2211-8128. Editorial: Elsevier. 2015.
  12. Alicia Esther Ares, CarlosEnrique Schvezov, INVESTIGATION ON Al2O3-REINFORCED ZINC-ALUMINUM MATRIX COMPOSITES, Procedia Materials Science. Volumen: 8, Páginas: 424-433. Número ISSN: 2211-8128. Editorial: Elsevier. 2015.
  13. Hernán Darío Traid, María Laura Vera, Alicia Esther Ares, Marta Irene Litter, POROUS TITANIUM DIOXIDE COATINGS OBTAINED BY ANODIC OXIDATION FOR PHOTOCATALYTIC APPLICATIONS, Procedia Materials Science.Volumen: 9, Páginas: 619-626. Número ISSN: 2211-8128. Editorial: Elsevier. 2015.
  14. Alex Ivan Kociubczyk, Claudia Marcela Méndez, Ricardo Walter Gregorutti, Alicia Esther Ares, ELECTROCHEMICAL TESTS IN STAINLESS STEEL SURGICAL IMPLANTS, Procedia Materials Science. Volumen: 9, Páginas: 335-340.Número ISSN: 2211-8128. Editorial: Elsevier. 2015.
  15. Gustavo Raúl Kramer, Claudia Marcela Méndez, Alicia Esther Ares, EVALUATION OF CORROSION RESISTANCE OF ALUMINUM-BASED ALLOYS IN BIOETHANOL PRODUCED IN MISIONES, Procedia Materials Science. Volumen: 9,Páginas: 341-349. Número ISSN: 2211-8128. Editorial: Elsevier. 2015.