Back
Return
Biography
Prof. Mohammad Abdel-Karim

Prof. Mohammad Abdel-Karim

Industrial Engineering Department

Fayoum University, Egypt

Professor


Email: Mak02@fayoum.edu.eg,Karim12004@yahoo.com


Qualifications


1999 Ph.D., Nagoya University, Mechanical Engineering

1992 M.Sc., Cairo University, Mechanical Engineering

1988 B.Sc., Cairo University, Mechanical Engineering


Publications (selected)

  1. Mizuno, M. Mima, Y., Abdel-Karim, M., and Ohno, N., “Uniaxial Ratchetting of 316FR Steel at Room Temperature, Part I-Experiments”, ASME, Journal of Engineering Materials and Technology, Vol. 122, No. 1, PP 29-34, 2000.
  2. Ohno, N., and Abdel-Karim, M., “Uniaxial Ratchetting of 316FR Steel at Room Temperature, Part II-Constitutive Modeling and Simulations”, ASME, Journal of Engineering Materials and Technology, Vol. 122, No. 1, PP 35-41, 2000.
  3. Abdel-Karim, M. and Ohno, N., “Kinematic Hardening Model Suitable for Ratchetting with Steady State”, International Journal of Plasticity, Vol. 16, pp. 225-240, 2000.
  4. Attia, M.S., Abdel-Karim, M. and Megahed, M., “Shakedown Analysis of an Infinite Plate with a Central Hole under Biaxial Tension”, Proceedings of the Seventh Cairo University International Conference MDP-7 (Ed. Hassan M.F. and Megahed, S.M.) Cairo, Egypt, pp. 185-191, Feb. 15-17, 2000.
  5. Attia, M.S., Abdel-Karim, M. and Megahed, M., “Shakedown Analysis of a Finite Plate with Single Edge Notch Under Uniaxial Tension”, ASME, Reliability, Stress Analysis and Failure Prevention Conference (RSAFP), Maryland, Sept. 9-11, 2000.
  6. Megahed, M. Abdel-Karim, M. and Attia, M.S., “Numerical &Experimental Investigations on Shakedown Loads for Structures with Severe Geometrical Discontinuities. PVP-Vol. 430, Pressure Vessel and Piping Design and Analysis (Ed. D.H. Martens), Atlanta, July 22-36, pp. 59-66, 2001.
  7. Abdel-Karim, M., “Theoretical Investigation on Non-Isothermal Cyclic Plasticity”, Journal of Engineering and Applied Science, Faculty of Engineering, Cairo University, Vol. 50 No. 6, pp. 1145-1163, 2003.
  8. Abdel-Karim, M., “Verification of a Numerical Integration Method Based On Multiaxial Loading”, Proceedings of the Eights Cairo University International Conference MDP-8 (Ed. Metwalli, S. Mokhtar, M.O.A and El-Danaf, I.) Cairo, Egypt, Jan. 4-6, 2004.
  9. Abdel-Karim, M., “Evaluation of the Armstrong Frederick Type Plasticity Theories under Non-Proportional Loading”, Proceedings of the Eights Cairo University International Conference MDP-8 (Ed. Metwalli, S. Mokhtar, M.O.A and El-Danaf, I.) Cairo, Egypt, Jan, 4-6, 2004.
  10. Abdel-Karim, M., “Influence of Yield Surface Distortion on Prediction of Multiaxial Loading Conditions”, Journal of Engineering and Applied Science, Faculty of Engineering, Cairo University, Vol. 51, No. 3, pp. 593-612, June, 2004.
  11. Abdel-Karim, M., “Theoretical Study on Creep-Ratchetting Interaction of SUSD304 Stainless Steel, Journal of Engineering and Applied Science, Faculty of Engineering, Cairo University, Vol. 52, No. 3, pp. 593-608, June, 2005.
  12. Abdel-Karim, M., Assessment of Unified Theories in Simulating Creep-Ratchetting Behavior of Viscous Materials, The 18th International Conference on Structural Mechanics in Reactor Technology (SMiRT 18), Beijing, China, August 7-12, 2005.
  13. Abdel-Karim, M., Shakedown of Complex Structures According to Various Hardening Rules, International Journal of Pressure Vessels and Piping, Vol. 82, pp. 427-458, 2005.
  14. Abdel-Karim, M., On Creep Ratchetting Interaction: Assessment of Unified Theories, Proceedings of PLASTICITY 05: The Eleventh International Symposiums on Plasticity and its Current Applications, Kauai, Hawaii, Jan 3-8, 2005.
  15. Khan, A.S. Abdel-Karim, M., and Chen, X., Ratchetting of OFHC Copper under Multiaxial Loading Conditions, Proceedings of PLASTICITY 05: The Eleventh International Symposiums on Plasticity and its Current Applications, Kauai, Hawaii, Jan 3-8, 2005.
  16. Chen, G., Chen, X., Kim, K.S., Abdel-Karim, M., and Sakane, M., Strain Rate Dependent Constitutive Model of Multiaxial Ratchetting of 63Sn-37Pb Solder, Transaction of the ASME, Journal of Electronic Packaging, Vol. 129, pp. 278-286, 2007.
  17. Khan, A. S. Abdel-Karim, M., and Chen, X., Cyclic Multiaxial and Shear Finite Deformation Response of OFHC: Part I, Experimental Results, International Journal of Plasticity, Vol. 23, pp. 1285-1306, 2007.
  18. Abdel-Karim, M., Modified Kinematic Hardening Rules for Simulations of Ratchetting, International Journal of Plasticity, Vol. 25, pp. 1560–1587, 2009.
  19. Abdel-Karim, M., An extension for the Ohno-Wang kinematic hardening rules to incorporate isotropic hardening, International Journal of Pressure Vessels and Piping, Vol. 87, No. 4, pp. 170-176, 2010.
  20. Abdel-Karim, M., An evaluation for several kinematic hardening rules on prediction of multiaxial stress-controlled ratchetting, International Journal of Plasticity, Vol. 26, No. 5, pp. 711-730, 2010.
  21. Abdel-Karim, M., and Khan, A.S., Cyclic Multiaxial and Shear Finite Deformation Response of OFHC Cu: Part II, An extension to the KHL model and simulations, International Journal of Plasticity, Vol. 26, No. 5, pp. 758-773, 2010.
  22. Abdel-Karim, M., Effect of elastic modulus variation during plastic deformation on simulations of ratchetting, The 14th International Conference on Applied Mechanics and Mechanical Engineering, AMME-14, Cairo, May 25-27, 2010.

Profile Details

NULL