Back
Return
Biography
Prof. Zhirui Wang

Prof. Zhirui Wang

Department of Materials Science and Engineering

University of Toronto, Canada

Professor


Email: zhirui.wang@utoronto.ca


Qualifications


1986 PDF, University of Pennsylvania

1985 Ph.D., Polytechnic University of New York

1982 M.ASc., Polytechnic University of New York

1968 B.Eng., Jiaotong University


Publications (selected)

  1. Charles C.F. Kwan and Zhirui Wang, 2011, “A composite nature of cyclic strain accommodation mechanisms of accumulative roll-bonding (ARB) processed Cu sheet materials”, Mat. Sci. and Eng. A528, pp. 2042-2048.
  2. Charles C.F. Kwan and Zhirui Wang, 2011, “On the Cyclic Deformation Response and Micostructural Mechanisms of ECAPed and ARPed Copper-an Overview”, Material Science Forum, Vol. 683, pp. 55-68.
  3. Jun Hiang, Zhirui Wang and Jie Zhou, 2011, “Cyclic Deformation Response of β-Annealed Ti-5Al-5V-5Mo-3Cr Alloy Under Compressive Loading Conditions”, Metallurgical and Materials Transactions A, Vol. 42A, pp. 2868-2880.
  4. Z. Wang and Charles Kwan, 2011, “Cyclic Deformation Response of ARBed Cu with Composite Natured Ultra-fine-microstructures and its comparison with cyclic deformation response of ECAPed Cu”, Advances in Met. Mat. Mech., pp.16-23.
  5. Ji Luo and Zhirui Wang, 2010, “A New Constitutive Model for Work Hardening Based on Grain Boundary Energy Density”, Material Science Forum Vol. 633-634, pp. 249-259.
  6. Charles Kwan and Zhirui Wang, 2010, “Cyclic Deformation Behavior of Ultra-fine Grained Copper Processed by Accumulative Roll-Bonding”, Procedia Engineering, Vol. 2, Issue 1, pp101-110.
  7. Tzu-Yin (Jean) Hsu and Zhirui Wang, 2010, “Fatigue crack Initiation at Notch Root under Compressive Cyclic Loading”, Procedia Engineering, Vol. 2, Issue 1, pp91-100.
  8. Rana Sohdi, Joyce Koo, Matthew Gallaugher, and Zhirui Wang, 2010, Proposed ToF-SIMS/XPS standardization methods for bonding wires in electronic packaging applications, Surface and Interface Analysis , accepted and in press.
  9. Charles, Kwan and Zhirui Wang, 2010, “Cyclic deformation response of ARBed Cu sheet materials”, ACTA Mat., Submitted.
  10. Cui, J., Shek, G.K., Scarth, D.A. and Wang, Z.R., 2008, "Delayed Hydride Cracking Initiation at Notches in Zr-2.5Nb Alloys", accepted for publication in Journal of Pressure Vessel Technology, (JPVT), Paper No. PVT-07-1135.
  11. Cui, J., Shek, G.K. and Wang, Z.R., 2008, Overload Fracture of Hydrided Region at Simulated Blunt Flaws in Zr-2.5Nb, Pressure Tube Material, accepted for publication in Journal of Pressure Vessel Technology (JPVT), Paper No. PVT-07-1131.
  12. Kwan, Charles, Wang, Zhirui, Kang, and Suk-Bong, 2008, Mechanical Behavior and Microstructural Evolution Upon Annealing Of the ARB (Accumulative Roll-Bonding) Processed Al Alloy 1100, Mat. Sci. Eng. (A),  A 480(1-2), pp. 148-159.
  13. Shakeri, Hamid R. and Wang, Zhirui, 2007, “Effect of alternative Aging Process on the Fracture and Interfacial Properties of Particulate Al2O3 Reinforced MMCs”, Met and Mat. Trans., Vol. 33, No 6, 1699-1713.
  14. Chang, B. H., Du, D., Sui, B., Zhou, Y., Wang, Z., and Heidarzadeh, F. , 2007, “Effect of Forhing Force on Fatigue Behavior of Spot Welded Joints of Al Alloy 5182”, J Manufac. Sci. and Eng., Vol.129, pp. 95-100.
  15. Cui, Jun, Shek, Gordon, and Wang, Zhirui, 2007, “Examination of Parameters Affecting Overload Fracture Behavior of Flaw-Tip Hydrides in Zr-2.5Nb Pressure Tubes in CANDU Reactors”, ICAPP, pp. 7261-7272.
  16. Mitsuhiro Okayasu and Zhirui Wang, 2007, “Experimental investigation of the effects of artificial wedges on fatigue crack growth and crack closing behavior in annealed SAE 1045 steel”, Int’l Journal of Fatigue 29, pp. 962-976.
  17. Luo, Ji and Wang, Zhirui, 2006, “On the physical meaning of Hall-Petch constant, Material Science Forum”, Vols. 15-17, pp. 643-648.
  18. Luo, J., Mei, Z., Tian, W., and Wang, Z., 2006, “Diminishing of work hardening in electroformed polycrystalline copper with nano-sized and uf-sized twins”, Mat Sci. Eng. A., 441, pp. 282-290.
  19. Okayasu, M., Chen, D. L., and Wang, Z., 2006, “Experimental Study of the Effect of Loading Condition On the Fracture Surface Contact Features and Crack Closure Behavior in a Low Carbon Steel”, Eng. Frac. Mech., 73, pp. 1117-1132.
  20. Hongwei Ma and Zhirui Wang, 2006, “The Influence of the Bauschinger Effect on Springback Prediction for Dual Phase Steel”, SAE Tech Paper Series.

Profile Details

http//MSE.utoronto.ca