Prof. Wen-Pei Sung
Department of Landscape Architecture
Chin-Yi University of Technology, Taiwan
2002 Ph.D., Civil Engineering, National
1989 M.S., Civil Engineering, North Carolina State
1986 B.S., Civil and Hydraulic
Engineering, Chungniversity Yuan Christian
J. H. Lin, Wen-Pei Sung*, T. Y. Chen, Y. J. Lin and J. C. Kuo,
2012, “Applying the Taguchi Method in Improving the Production of Bacterial
Cellulose”, Journal of Biobased Materials and Bioenergy (SCI, EI), Vol. 6,
No.6, pp. 1-7.
Wen-Pei Sung, Chen, Ting-Yu, Shih, Ming-Hsiang, Zhao, Yu-Kuang,
2012, “Developing a Practical Geothermal Indoor Heating,Ventilation and Air
Conditioning System”, Advanced Science Letters (SCI), Vol. 14, No.1, pp.
Rong Chen, Wen-Pei Sung*, Hung-Chang Chang and Yi-Rou Chi, 2013,
“Applying Outdoor Environment to Develop Health, Comfort and Energy Saving
Office in Hot-Humid Climate”, The Scientific World Journal (SCI), Vol. 2013,
Article ID 367283, 8 pages, http://dx.doi.org/10.1155/2013/367283.
Hsueh-Chun Lin, Yang-Shan Lin, Yao-Ming Hong, Yao-Chiang Kan,
Wen-Pei Sung*, 2013, “Risk Assessment with Coupling Multiple Physics
Computation for Potential Failures of Landslide Dam Model”, Disaster Advances
(SCI), Vol. 6, No. S3, pp. 326-337.
Wen-Pei Sung, H. R. Wang, T.T. Tsai, 2011, “Analysis of energy and
carbon dioxide emission caused by power consumption” International Journal of
Energy Research , Vol. 35, Issue 11, pp. 1014-1022, September, 2011.
T.T. Tsai, Wen-Pei Sung, and W. Song, 2011, “Identification
of Indoor Airborne Microorganisms and Their Disinfection with Combined
Nano-Ag/TiO2 Photocatalyst and UV Light”, Environmental Engineering Science,
Vol. 28, No. 9, pp. 635-642. September.
K.F. Chen, C.M. Kao, Wen-Pei Sung, C.C. Lin, and T.Y.
Yeh, “Enhanced In Situ Anaerobic Bioremediation of TCE-contaminated Groundwater
Using Nanoscale Zero-valent Iron (nZVI)”, Periodical of Materials Science
Forum, Vol. 694, pp. 3-7.
M. J. Wu, Y.S. Feng, Wen-Pei Sung*, R. Y. Surampalli,
2011, “Quantification and analysis of airborne bacterial characteristics
in a nursing care institution”, Journal of the Air & Waste Management
Association, Vol. 61, No. 7, pp. 732–739.
Viktor Gribniak, Gintaris Kaklauskas, Darius Bacinskas, Wen-Pei
Sung, Aleksandr Sokolov, Darius Ulbinas, 2011, “Investigation of Shrinkage of
Concrete Mixtures Used for Bridge Construction in LITHUANIA”, The Baltic
Journal of Road and Bridge Engineering , Vol. 6, No. 2, pp. 77–83.
C. G. Go, C. H.Sui, M. H. Shih, Wen-Pei Sung, 2011, “Validity
of the Displacement Dependent Semi-Active Hydraulic Damper Used in a
Structure”, Journal of Vibration Control, Vol. 17, No. 4, pp. 578-587.
Wen-Pei Sung, Ming-Hsiang Shih, and Chang-Liang Chen, 2011,
“Development of Seismic Isolation Techniques for Elevated Platform of Hi-Tech
Factory Building”, Advanced Science Letters, Vol. 4, No. 3, pp. 759-763.
M. H. Shih, Wen-Pei Sung and F. J. Tsai, 2011,
“Analysis Accuracy of Digital Image Correlation Technique to Monitor Natural
Frequency Response of Building under Dynamic Excitation”, Applied Mechanics and
Materials, Vols. 71-78, pp 3904-3908.
Wen-Pei Sung , M. H. Shih and F. J. Tsai,
2011, “Development of Digital Image Correlation Technique to Monitor Structural
Damage Based on Natural Frequency as Damage Index”, Applied Mechanics and
Materials, Vols. 71-78, pp 3899-3903.
Wen-Pei Sung , T. T. Tsai, H. J. Wang, M. D. Chen, 2011,
“ Improved energy performance of air-conditioning system using variable
primary flow chilled water systems in an office building”, Applied
Mechanics and Materials, Vols. 71-78, pp 1973-1977.
Y. K. Zhao, L. Wei, C. C. LIEN, Wen-Pei Sung 2011,
“Analyses of the Insulating Capacity of Green Roofs Made of Phenolic Resin
board with Vegetation Coverage”, Applied Mechanics and
Materials, Vols. 71-78, pp 4491-4495.
Wen-Pei Sung, W. S. Ou, J.-M Chang and Y.-D. Kuan, 2011, “Studies
on an Integrated Energy-Saving System Combining Architectural Energy-Saving
Features and Renewable Energy in Taiwan”, Advanced Materials
Research, Vols. 250-253, pp 3271-3274.
Ming-Hsiang Shih, Wen-Pei Sung, Darius Bacinskas, 2011,
“Development of Digital Imagine Correlation (DIC) Method for Three-Dimensional
Rugged Surface of Construction Material”, Advanced Materials
Research, Vols. 243-249, pp 5907-5910.
Wen-Pei Sung, T.T. Tsai, M.J. Wu, H. R. Wang, R. Y. Surampalli,
2011, “Removal of indoor airborne bacteria by the nano-Ag/TiO2 as photocatalyst:
a feasibility study in museum and nursing institutions”, Journal of
Environmental Engineering, ASCE, Vol. 137, No. 3, pp. 163-170.
T.Y. Chen, Wen-Pei Sung, Ming-Hsiang Shih and Yu-Kuang Zhao,
2011, “Evaluating the Effectiveness of Applying Phenolic Resin as Thermal
Barrier in Buildings During Summer and Winter”, Applied Mechanics and
Materials, Vol. 44-47, pp. 2040-2044.
Wen-Pei Sung, Ming-Hsiang Shih and Yu-Kuang Zhao, 2011, “Digital
Imagine Correlation (DIC) Method for Detecting Crack Development in
Construction Materials Subject to loading”, Applied Mechanics and Materials,
Vol. 44-47, pp. 2524-2528.
M. H. Shih, Wen-Pei Sung and M. J. Wu, 2010,
“Development of Numerical Modeling of Analysis Program for Energy-Dissipating
Behavior of Velocity Dependent Hydraulic Damper”, Sadhana - Academy Proceedings
in Engineering Science, Vol. 35, No. 5, pp. 631-647.
Wen-Pei Sung, M.H. Shih and Y. K. Zhao 2010,“Energy
Dissipation Behaviours and Seismic Reduction Performance of a Proposed Velocity
and Displacement Dependent Hydraulic Damper (VDHD)”, Journal of Civil
Engineering and Management , Vol. 16, No. 3, pp. 428-438.
Y.K. Zhao, Wen-Pei Sung, T.T. Tsai,H. J. Wang, 2010,
“Application of nano-Ag/TiO2 as photocatalyst for air quality control: a
feasibility study”, Journal of the Air & Waste Management Association, Vol.
60, March, pp. 337-345.
Ming-Hsiang Shih and Wen-Pei Sung, 2010, “A Design Concept of
Autonomous Controller for Improving Seismic Proof Capability of Semi-Active
Control Device”, Experimental Techniques, Vol.34, No.4, pp. 20-26.
Ming-Hsiang Shih, Wen-Pei Sung and Chang-Liang
Chen, 2010, “Earthquake Proof Efficacy of Velocity and Displacement Dependent
Hydraulic Damper (VDHD) for R.C. Structures”, The Structural Design of
Tall and Special Buildings, Vol.19, No.5, pp. 479-496.