Dr. Jinwu Kang
Tsinghua University, China
2014 School of Materials Science and Engineering,
Tsinghua University, Associate Professor
1995 Ph.D., Dept. of Mechanical Engineering, Tsinghua University,China
1992 M.S., Dept. of Material Science and Technology, Northeastern University, China
1988 B.S., Dept. of Material Science and Technology, Northeastern Institute of Science and Technology, China
Jinwu Kang, Haimin Long, Yongjie Li, Rui You, Xiaokun Hao, Gang Nie, Tianjiao Wang, Chengchun Zhang，Observation
of the Mold-Filling Process of a Large Hydro-Turbine Guide Vane Casting，Metallurgical and Materials Transactions B，2015,
Kang, Jinwu ; Hao, Xiaokun; Nie, Gang; Long, Haimin; Liu, Baicheng，Intensive riser cooling of
castings after solidification, Journal of Materials Processing Technology, 2015，215:278-286.
Jinwu Kang, Xiaopeng Zhang, , Shuo Wang, Jiyu Ma, Tianyou Huang，The
comparison of ultrasonic effects in different metal melts. Ultrasonics, 2015, 57：11–17.
Kang, Xiaopeng Zhang, Yisen Hu, Jiyu Ma，Yongyi
Hu and Tianyou Huang，Ultrasonic
Treatment of the 304 Stainless Steel Melt，ISIJ
International, 2014, 54(2): 281–287.
Kang, Chao dong, Xiaokun Hao,Gang Nie,Houfa Shen and Baicheng Liu . A Water Analog
Experimental Method for the Diffusion and Distribution of Alloy elements in
Liquid SteelduringIngot Filling Process, ISIJ International, 2014, 54(2):
Jinwu, Zhang Xiaopeng, Zhang Chi，Application
of 3D stereoscopic visualization technology in casting aspect，China Foundry，2014,11(4),308-313.
Kang, Chao Dong, Xiaokun Hao, Gang Nie, Yongyi Hu, Tianyou Huang, Water Analog
Experimental Study on the Filling Process of a Steam Turbine HousingCasting. International
Journal of Materials and Product Technology,2013,47(1/2/3/4): 200-
jinwu;Wang Tianjiao; HuangTianyou; Baicheng Liu Deformation Prediction of a Heavy Hydro Turbine Blade During the Casting
Process with Consideration of Martensitic Transformation. Metallurgical and
Materials Transactions A: Physical Metallurgy and Materials Science, 2013，44A（12）：5343-5353.
Kang, Xiaokun Hao, Gang Nie, Haimin Long, et al. Experimental Study on Filling.
Process of Lost Foam Casting of A Cast Iron Plate, International
Journal of Materials and Product Technology, 2013 ,47(1/2/3/4): 188
Liu B.C.,Kang J.W.,Huang, T.Y..Stress analysis and deformation
prediction of a heavy hydraulic turbine blade casting during casting and heat
treatment. Materials Science and Technology (United Kingdom), 2012, 28(7):808-811.
J. W., LongH.M., WangT. J, HuangT. Y. and LiuB.C. Evaluation of distortion of
castings. International Journal of Cast Metals Research, 2011, 24(3/4):,228-232.
Kang, Ran Zhang, Tianyou Huang and Baicheng Liu. Stress Analysis And
Deformation Prediction Of A Heavy Hydraulic Turbine Blade Casting In Heat
Treatment Process Collected Proceedings of 139th TMS Annual Meeting &
Exhibition Seattle, USA, 14-18 Feb., 2010,553-561.
Kang, Tianjiao Wang, Hailiang Yu, Tianyou Huang and Baicheng Liu, Temperature
and Deformation Prediction of A Heavy Hydraulic Turbine Band Casting in Heat
Treatment Process, the 7th pacific rim international conference on advance
materials and processing, 1-5 august. 2010, cairns, Australia. Materials
Science Forum Vols. 654-656 (2010) pp 1335-1338 (invited speech).
Baicheng, Kang jinwu, Huang tianyou，Stress
Analysis And Deformation Prediction Of A Heavy Hydraulic Turbine Blade Casting
During Casting And Heat Treatment Processes ,4th International Conference on
Thermal Process Modeling and Computer Simulation，31 May - 2 June 2010, Shanghai,
J.W., Zhang J.F., Liu B.C., Huang T.Y. Improved thermal stress analysis for
castings. International Journal of Cast Metals Research, 2008, 21(1–4):
J.W., Huang T.Y. , Liu B.C. Review of production status of heavy steel
castings and key technologies for their manufacture in china. China Foundry,
Kang, J. Zhang, B. Liu and T. Huang，Improved
thermal stress analysis for castings，International
Journal of Cast Metals Research, 2008, 21（1–3）, 424-429.
Jinwu, Huang Tianyou And Liu Baicheng, Review Of Production Status Of Heavy
Steel Castings And Key Technologies For Their Manufacture In China, China
Yan, Kang Jinwu，Huang
Tianyou, Hu Yongyi，Thermal
Stresses In A Cylinder Block Casting Due To Coupled Thermal And Mechanical
And Technology， 2008，13（2），132-136.
J.Kang, B.Liu, Numerical Simulation of Gas Quenching Process of Workpieces,
MS&T07 Material Science And Technology 2007 Conference and Exhibition,
September 17-19, 2007, Detroit, Michigan.
Luo, J. Kang, B. Liu, The Analysis of Gas Flow in the Wind Tunnel of High
Pressure Gas Quenching Furnace, MS&T07 Material Science And Technology 2007
Conference And Exhibition, MS&T07 Material Science And Technology 2007
Conference And Exhibition, September 17-19, 2007, Detroit, Michigan.
He, J. Kang, T. Huang, Effects of T6 Heat Treatment with Residual Heat of
Casting on Microstructure and Mechanical Properties of 319 Aluminum Alloy
Castings, MS&T07 Material Science And Technology 2007 Conference And
Exhibition, September 17-19, 2007, Detroit, Michigan.
Xiao-gang, KANG Jin-wu, HUANG Tian-you, LIU Bai-cheng，Thermal stress simulation
considering mechanical interaction between casting and mold， TMS (The Minerals, Metals
& Materials Society), 2007,March, Orlando, US.
Yuan, J. Kang, Y. Rong, and R.D. Sisson, Jr., FEM Modeling of Induction Hardening
Processes in Steel, Journal of Materials Engineering and Performance, Vol. 12
No. 5,October 2003, pp. 589-596.
Kang, Rohit Vaidya, Weiwei Wang and Yiming (Kevin) Rong ,A System for Heat
Treating Process Analysis, 2003 ASM Heat Treating Society Conference and
Exposition, Columbus, Ohio, USA, Sept.15-17, 2003.
Kang and Yiming (Kevin) Rong, Modeling and simulation of heat transfer in
loaded heat treatment furnaces, The 13th International Congress on Heat
Treatment and Surface Engineering, Columbus, Ohio, Oct. 7-11, 2002.
Liu, J.W. Kang, S.M. Xiong, A study on the numerical simulation of thermal
stress during the solidification of shaped castings, Science and Technology of
Advanced Materials 2 (2001), 157-164.
JW, Chen Y, Xiong SM, et al.，Numerical
Simulation of Thermal Stress and Deformation of Engine Block Iron Casting，Int J Cast Metal Res 11: (6)
JW, Liu BC, Xiong SM，Numerical
simulation of thermal stress of shaped casting based on rheological model，J MATER SCI TECHNOL 15: (3) MAY
Kang Jinwu, Xi ong
Shoumei, Liu Baicheng, Study on the Prediction of Shrinkage Cavity in Steel
Casting By Multi-Hot-Spot and Simultaneous Shrinkage-Feeding Method, Foundry,
1999(8): 478-481( in Chinese).