Back
Return
Biography
zhaopian
Prof. Hailiang Yu

Vice-Chancellor’s Research Fellow,

Central South University

Professor


E-mail: hailiang@uow.edu.au, yuhailiang1980@tom.com, yuhailiang@mail.tsinghua.edu.cn


Qualifications


2012    Early career researcher development program, University of Wollongong, Australia
2003    PhD, MetalForming. State Key Lab of Rolling and Automation, Northeastern University, China
1999    BEng, MetalForming. School of Materials and Metallurgical, Northeastern University, China


Publications (selected)

  1. Yu H.L.*, Tieu K., Lu C., Godbole A. An investigation of interface bonding of bimetallic foils by combined accumulative roll bonding and asymmetric rolling  techniques. Metallurgical and Materials Transactions A, accepted at 2014-3-27.
  2. Yu H.L.*, Lu C., Tieu K., Kong C. Fabrication of ultrafine-grained Aluminum sheets by four-layer accumulative roll bonding. Materials and Manufacturing Processes, 2013. DOI: 10.1080/10426914.2013.872259. Available from: http://www.tandfonline.com/doi/abs/10.1080/10426914.2013.872259
  3. Yu H.L.*, Liu X.H., Li X.W., Godbole A. Crack healing in a low-carbon steel under hot plastic deformation. Metallurgical and Materials Transactions A, 2013,
    DOI: 10.1007/s11661-013-2049-4.
    Available from: http://link.springer.com/article/10.1007%2Fs11661-013-2049-4#
  4. Yu H.L.*, Lu C., Tieu K., Godbole A., Sun Y., Liu M., Su L.H., Tang D.L., Kong C. Fabrication of nanostructured bimetal foils by accumulative roll bonding and asymmetric rolling. Scientific Reports, 2013, 3: 2373.
    Available from:
    http://www.nature.com/srep/2013/130806/srep02373/full/srep02373.html
  5. Yu H.L.*, Tieu K. Lu C., Liu X.H., Godbole A., Kong C. Mechanical properties of Al-Mg-Si alloy sheets produced using asymmetric cryorolling and ageing treatment. Materials Science Engineering A, 2013, 568: 212-218.
    Available from:
    http://dx.doi.org/10.1016/j.msea.2013.01.048
  6. Yu H.L.*, Lu C., Tieu K., Liu X.H. Wave motion of rolling force in variable gauge rolling process. Steel Research International, 2013, 84,
    DOI: 10.1002/srin.201300012.
    Available from: http://onlinelibrary.wiley.com/doi/10.1002/srin.201300012/abstract
  7. Yu H.L.*, Kang J.W., Lu C., Tieu K. Surface temperature difference for analysis of distortion of heavy weak-rigidity castings during heat treatment. Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture. 2013, 227(7): 1083-1086.
    Available from:
    http://intl-pib.sagepub.com/content/early/2013/05/24/0954405412468392.abstract?patientinform-links=yes&legid=sppib;0954405412468392v1
  8. Yu H.L.*, Kiet T., Lu C., Deng G.Y., Liu X.H. Occurrence of Surface Defects on Strips during Hot Rolling Process by FEM. International Journal of Advanced Manufacturing Technology, 2013, 67:1161-1170.
    Available from:
    http://link.springer.com/article/10.1007%2Fs00170-012-4556-7#
  9. Yu H.L.*, Lu C., Tieu K., Liu X.H., Sun Y., Yu Q.B., Kong C. Asymmetric cryorolling for fabrication of nanostructural aluminum sheets, Scientific Reports, 2012, 2: 772. DOI: 10.1038/srep00772
    Available from:
    http://www.nature.com/srep/2012/121025/srep00772/full/srep00772.html
  10. Yu H.L.*, Yu Q.B., Kang J.W., Liu X.H. Investigation on Temperature Change of Cold Magnesium Alloy Strips Rolling Process with Heated Roll. Journal of Materials Engineering and Performance, 2012, 21. 1841-1848.
    Available from:
    http://link.springer.com/article/10.1007%2Fs11665-011-0091-1#
  11. Yu H.L.*, Kang J.W., Wang T.J., et al. Distortion behavior of a heavy hydro turbine blade casting during forced air cooling in normalizing treatment process. Journal of Materials Engineering and Performance, 2012, 21 (1): 55-61 Available from: http://link.springer.com/article/10.1007%2Fs11665-010-9819-6#
  12. Yu H.*, Kang J., Huang T. Distortion behavior of hydro turbine blade castings during heat treatment processes under variation of seasonal temperature. Science China Technological Sciences, 2011, 54 (1): 81-87
    Available from:
    http://link.springer.com/article/10.1007%2Fs11431-010-4211-1#
  13. Yu H.*, Liu X. Friction and slab deformation behaviour during rough rolling. International Journal of Surface Science and Engineering, 2009, 3 (5-6): 423-434
    Available from:
    http://www.inderscience.com/info/inarticle.php?artid=29138
  14. Yu H.L.*, Bi H.Y., Liu X.H., Chen L.Q., Dong N.N. Behavior of inclusions with weak adhesion to strip matrix during rolling using FEM. Journal of Materials Processing Technology, 2009, 209 (9): 4274-4280
    Available from:
    http://dx.doi.org/10.1016/j.jmatprotec.2008.11.004
  15. Yu H.L.*, Liu X.H. Thermal-mechanical finite element analysis of evolution of surface cracks during slab rolling. Materials and Manufacturing Processes, 2009, 24 (5): 570-578
    Available from:
    http://www.tandfonline.com/doi/abs/10.1080/10426910902746895
  16. Yu H.L.*, Liu X.H., Li C.S., Lan H.F., Wang G.D. Research on the behavior of transversal crack in slab V-H rolling process by FEM. Journal of Materials Processing Technology, 2009, 209 (6): 2876-2886
    Available from:
    http://dx.doi.org.ezproxy.uow.edu.au/10.1016/j.jmatprotec.2008.06.045
  17. Yu H.L.*, Liu X.H., Bi H.Y., Chen L.Q. Deformation behavior of inclusions in stainless steel strips during multi-pass cold rolling. Journal of Materials Processing Technology, 2009, 209 (1): 455-461
    Available from:
    http://dx.doi.org.ezproxy.uow.edu.au/10.1016/j.jmatprotec.2008.02.016
  18. Yu H.L.*, Liu X.H., Lee G.T., Park H.D. Numerical analysis of strip edge drop for Sendzimir mill. Journal of Materials Processing Technology, 2008, 208 (1-3): 42-52
    Available from:
    http://dx.doi.org.ezproxy.uow.edu.au/10.1016/j.jmatprotec.2007.12.124
  19. Yu H.L.*, BI H.Y., LIU X.H., TU Y.F. Strain distribution of strips with spherical inclusion during cold rolling. Transactions of Nonferrous Metals Society of China (English Edition), 2008, 18 (4): 919-924
    Available from:
    http://dx.doi.org.ezproxy.uow.edu.au/10.1016/S1003-6326(08)60159-4
  20. Yu H.L.*, Liu X.H., Ren X.J. Behaviour of longitudinal cracks on slab surfaces in V-H rolling processes. Steel Research International, 2008, 79 (7): 536-542
    Available from:
    http://www.paper.edu.cn/selfs/homepage/223376.htm
  21. Yu H.L.*, Liu X.H., Li X.W. FE analysis of inclusion deformation and crack generation during cold rolling with a transition layer. Materials Letters, 2008, 62 (10-11): 1595-1598
    Available from:
    http://dx.doi.org.ezproxy.uow.edu.au/10.1016/j.matlet.2007.09.031
  22. Yu H.L.*, Liu X.H., Lee G.T., Li X.W., Park H.D. Numerical analysis of roll deflection for Sendzimir mill. Journal of Manufacturing Science and Engineering Transactions of the ASME, 2008, 130 (1): 0110161-0110167
    Available from:
    http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=1452011
  23. Yu H.L.*, Liu X.H., Lee G.T. Contact element method with two relative coordinates and its application to prediction of strip profile of a sendzimir mill. ISIJ International, 2007, 47 (7): 996-1005
    Available from:
    http://dx.doi.org/10.2355/isijinternational.47.996
  24. YU H.L.*, LIU X.H., LEE G.T. Analysis of rolls deflection of Sendzimir mill by 3D FEM. Transactions of Nonferrous Metals Society of China (English Edition), 2007, 17 (3): 600-605
    Available from:
    http://dx.doi.org.ezproxy.uow.edu.au/10.1016/S1003-6326(07)60141-1
  25. Yu H.L.*, Liu X., Zhao X., Kusaba Y. FEM analysis for V-H rolling process by updating geometric method. Journal of Materials Processing Technology, 2006, 180 (1-3): 323-327
    Available from:
    http://dx.doi.org.ezproxy.uow.edu.au/10.1016/j.jmatprotec.2006.07.012