Back
Return
Biography
Shahnor Basri

Prof. Shahnor Basri

Universiti Putra Malaysia Selangor, Malaysia


Email:shahnor@eng.upm.edu.my


Qualifications

1990  Ph.D., University of Wales, Computational Mechanics

1986  B.Sc., University of Wales, Mechanical Engineering


Publications (Selected)

  1. ShahNor Basri, Modelling of outflow Sediment Concentration from a Detention Pond of a River System’, Journal of the Institution of Engineers, Vol. 59(2), 1998.
  2. ShahNor Basri, ‘Finite Element Modelling of a Twin-Sitters MD3-160 Wings’, Journal AIAA, 37, 1998.
  3. ShahNor Basri, and O.M Ahmed, ‘Boundary Element Models for a Split Flap Airfoil’, AIAA Journal, 1998.
  4. W. Asrar and ShahNor Basri, ‘High-Order Compact Scheme for Quasi One Dimensional Flow’, AIAA Annual Congress, Texas, USA ,1999 (also published in AIAA Journal 2000).
  5. S.E. Sadique, M.A.H. Mollah, N.M. Ali, M.M.Haque,S.Basri, M.M.Hamdan and. S.M. Sapuan, ‘ Influence of Aluminium Additions on the Rate of Oxidation of Iron-Chromium Alloys’, Journal of Corrosion Science and Engineering, Vol. 1 (18) (ISSN 1466-8858) –http:/www.cp.umist.ac.uk/JCSE/.
  6. S.E. Sadique, A.H. Mollah, M.S.Islam, M.M. Ali, M.M.Hamdan andS.Basri‘ High Temperature Oxidation Behaviour of Iron-Chromium-Aluminium Alloys’, Oxidation of Metals, Volume 54, No. 5-6, Dec 2000, pp 385-400.
  7. S.E Sadique, S.M. Salit,S.Basriand M.H.M. Mohamad, ‘ A Review of Boundary Element Modeling of the Thermo-Elastohydrodynamics Lubrication in Hard Rolling Line Contact’, WEAR an International Journal of the Science and Technology of Friction Lubrication and Wear, Feb. 1999.
  8. M.H . Onsa, S.M Sapuan, S.Basri, and M.M.H. Megat Ahmad and M.A. Malique, ‘Elastohydrodynamics Lubrication Study of Hard Rolling Contact Using Boundary Element Method, Journal of Industrial Lubrication and Technology, Vol. 53 No. 4, 2001, pp. 148-151.
  9. S.Basri and M.H. Onsa, ‘Thermal Analysis of 3-Lobe Profile Bore Bearing ‘, Accepted for Journal of Heat Transfer,Dec 2000.
  10. M.Onsa, S.M.Sapuan,S.Basri, M.M.Hamdan and M. Malique, ‘A Literature Survey of Elastohydrodynamic Lubrication in Hard Rolling Line Contact’, Industrial Lubrication and Tribology; Volume 53 No. 4; 2001, pp 148-154.
  11. N. Dewan,B. ShahNorand S.M.Salit, ’Analysis of a Cylindrical Bore Bearing’, Computer Assisted Mechanics and Engineering Science (CAMES), 2000.
  12. N. Dewan,S.Basriand S.M. Salit, ‘Effects of Variations in Eccentricity Ratio and Shaft Speed on Load Capacity, Side Leakage and Power Loss in journal Bearing’, Journal of Industrial Technology 10(1),2001, pp115-128.
  13. M.Onsa, S.M.Sapuan, S.E. Sadique,S.Basri, and M.M.H. Megat Ahmad ‘A Literature Survey of Elastohydrodynamic Lubrication in Hard Rolling Line Contact’, Journal of Industrial Technology; Volume 10(1); 2001, pp 1-16.
  14. Mahmood K. Mawlood, Waqar Asrar, ShahNor Basri and Megat M.H.M. Ahmad, ‘High-Order Compact Finite Differenvce Solution of Navier-Stokes Equations’, Jurnal Mekanikal, 12, Dec. 2001, pp 83-95.

Profile Details

Null