Back
Return
Biography

Prof. George K. Adam

Department of Digital Systems

University of Thessaly, Greece


Email: gadam@uth.gr


Qualifications

1993  Ph.D., Strathclyde University, Glasgow, UK

1989  M.Sc., Technical University, Sofia, Bulgaria


Publications (Selected)

  1. Petrellis, N.; Adam, G.K. Symptom Tracking and Experimentation Platform for Covid-19 or Similar Infections. Computers 2021, 10, 22. DOI: https://doi.org/10.3390/computers10020022.
  2. Adam, G.K.; Petrellis, N.; Kontaxis, P.A.; Stylianos, T. COTS-Based Real-Time System Development: An Effective Application in Pump Motor Control. Computers 2020, 9, 97. DOI: https://doi.org/10.3390/computers9040097.
  3. Garani, G., Adam, G.K. A semantic trajectory data warehouse for improving nursing productivity. Springer Health Information Science and Systems 8, 25 (2020). DOI: https://doi.org/10.1007/s13755-020-00117-5.
  4. Adam, G.K.; Petrellis, N.; Garani, G.; Stylianos, T. COTS-Based Architectural Framework for Reliable Real-Time Control Applications in Manufacturing. MDPI Applied Sciences 2020, 10, 3228. DOI: https://doi.org/10.3390/app10093228.
  5. George K. Adam. DALI LED Driver Control System for Lighting Operations Based on Raspberry Pi and Kernel Modules. MDPI Electronics 2019, 8(9), 1021. DOI: https://doi.org/10.3390/electronics8091021.
  6. George K. Adam, Panagiotis A. Kontaxis, Lambros T. Doulos, Evangelos-Nikolaos D. Madias, Constantinos A. Bouroussis and Frangiskos V. Topalis. Embedded Microcontroller with a CCD Camera as a Digital Lighting Control System. MDPI Electronics 2019, 8(1), 33. DOI: https://doi.org/10.3390/electronics8010033.
  7. Tzortzios S, Gitsakis N, Adam G. Management of huge amounts of data using qualitative and statistical modeling: an agricultural case study. Biometrics & Biostatistics International Journal 2019, 8(1): 30-31. DOI: 10.15406/bbij.2019.08.00266.
  8. G. K. Adam, P. A. Kontaxis, C. A. Bouroussis, D. E. Ventzas, F. V. Topalis, "Embedded computer communication and control of DALI LED drivers", Proceedings of Balkan Light Conference 2015, pp.125-130, 16-19 September 2015, Athens, Greece.
  9. George K. Adam, Georgia Garani, and Dimitrios Ventzas “FPGA design of a camera control system for road traffic monitoring”, Proceedings of the 6th International Conference from Scientific Computing to Computational Engineering (LFME IC-SCCE 2014), vol.1, pp. 191-197, 9-12 July, 2014, Athens, Greece.
  10. Georgia Garani, George K. Adam and Dimitrios Ventzas, “Temporal data warehouse logical modelling”, Inderscience Int. J. Data Mining, Modelling and Management, vol. 8, no. 2, 144-159, 2016. DOI: https://doi.org/10.1504/IJDMMM.2016.077156.
  11. Ventzas D., Adam G., Garani G., Kokkinos C., and Evangelidis G., “An enhanced GIS for traffic cross-roads-traffic big data needs”, International Journal of Emerging Technology and Advanced Engineering, vol. 4, issue 11, 420-429, Nov.2014.
  12. N. Petrellis, G. Adam, D. Ventzas, “Monotonic error elimination in subrange A/D converters”, Journal of Circuits, Systems, and Computers, vol. 22, no. 1, World Scientific Publishing, pages 1250073-1 - 1250073-20, 2013. DOI: https://doi.org/10.1142/S0218126612500739.
  13. Nikos Petrellis, George Adam, Dimitrios Ventzas, “A real-time self-calibrated current mirror for wide range current reference generation, signal reproduction and delaying”, Elsevier Microelectronics Journal, vol. 43, no. 3, 225-234, 2012. DOI: https://doi.org/10.1016/j.mejo.2011.12.001.
  14. Georgia Garani and George K. Adam, “Qualitative models in the design and construction of an autonomous hydraulic press machine”, International Journal of Control and Intelligent Systems, ACTA Press, vol. 37, no. 1, 15-20, 2009. DOI: http://dx.doi.org/10.2316/Journal.201.2009.1.201-1957.
  15. Georgia Garani and George K. Adam, “Qualitative modelling at the design of concrete manufacturing machinery”, International Journal of Computers and Applications, Taylor & Francis Online, ACTA Press, vol. 30, no. 4, 325-330, 2008. DOI: https://doi.org/10.1080/1206212X.2008.11441912.
  16. Georgia Garani and George K. Adam, “Design, Simulation and Development of Software Modules for the Control of Concrete Elements Production Plant”, in Book: New Approaches in Automation and Robotics, I-Tech Education and Publishing KG, Vienna, Austria, ISBN: 978-3-902613-26-4, pages 261-282, 2008. DOI: https://doi.org/10.5772/5399.
  17. George K. Adam, Georgia Garani, Nicholas Samaras, Vilem Srovnal, Jiri Koziorek, Vladimir Kasik, “Embedded processor control of a lime machine”, International Journal of Systems Applications, Engineering & Development, NAUN University Press, vol. 2, no. 1, 6-12, 2008.
  18. Georgia Garani and George K. Adam, “Qualitative methods in control of industrial production units”, WSEAS Transactions on Computers, ISSN: 17109-2750, issue 9, vol. 5, 2025-2030, September 2006.
  19. George K. Adam, “Process scheduling evaluations using multithreaded software modules”, AMSE Advances in Modelling, Series D: Computer Science and Statistics periodical, ISSN 1291-5211, AMSE Press, vol. 10, no. 3, 13-26, 2005.
  20. C.V. Karapoulios, G. K. Adam, S. N. Xanthakis, “Graph homorphisms and qualitative software system analysis”, WSEAS Transactions on Information Science & Applications, ISSN: 1790-0832, issue 7, vol. 2, 859-867, July 2005.
  21. George K. Adam and Constantinos Karapoulios, “Model-based qualitative studies of complex manufacturing systems”, WSEAS Transactions on Information Science and Applications, ISSN 1790-0832, WSEAS Press, vol. 1, issue 1, 88-93, July 2004.
  22. G.K. Adam and V.G. Pappas, “Geographical Image Processing Using GisTool”, International Journal of Computers and Applications, ISSN 1206-212X, Taylor & Francis Online, ACTA Press, vol. 26, no. 2, 126-131, 2004. DOI: https://doi.org/10.1080/1206212X.2004.11441728.
  23. George K. Adam and Konstantinos Perakis, “Production quality control of an industrial unit using qualitative models and statistical methods”, AMSE Modeling, Measurement and Control, Series D periodical, ISSN 1240-4551, AMSE Press, vol. 24, no. 3, 49-60, 2003.
  24. George K. Adam and Nikos E. Mastorakis, “High level programming and control of a manufacturing system”, WSEAS Transactions on Circuits, WSEAS Press, vol. 2, issue 1, 301-308, Jan. 2003.
  25. G. K. Adam, “Qualitative Models in Simulation and Control of Structural Machine Processes”, International Journal of Modelling and Simulation, ISSN 0228-6203, Taylor & Francis Online, ACTA Press, vol. 22, no. 1, 23-29, 2002. DOI: https://doi.org/10.1080/02286203.2002.11442221.


Personal Website: 

https://ds.uth.gr/?page_id=2781&lang=en