Back
Return
Biography

Dr. Tomonori KATO

Department of Intelligent Mechanical Engineering, Faculty of Engineering

Fukuoka Institute of Technology, Japan

Associate Professor for pneumatics


Email: t-kato@fit.ac.jp


Qualifications

2007 Dr. Eng., Tokyo Institute of Technology, Mechano-Micro Engineering

2007 Registered Professional Engineer, Japan (Mechanical Engineering)


Publications (selected)

  1. Kenji Kawashima, Tomonori Kato, Yosuke Yamazaki, Michio Yanagisawa, Toshiharu KagawaDevelopment of slit type pressure differentiator using an isothermal chamber, Measurement Science and Technology, Vol.16 pp.1150-11562005
  2. Kenji Kawashima, Tomonori Kato, Koichi Sawamoto, Toshiharu Kagawa Realization of Virtual Sub Chamber on Active Controlled Pneumatic Isolation Table with Pressure Differentiator, Precision Engineering, Vol.31, Issue 2, pp.139-145 (2007)
  3. Tomonori Kato, Kenji Kawashima, Koichi Sawamoto, Toshiharu KagawaActive Control of a Pneumatic Isolation Table using Model Following Control and a Pressure DifferentiatorPrecision Engineering, Vol.31, pp.269-275 (2007)
  4. Tomonori KATO, Kenji KAWASHIMA, Tatsuya FUNAKI, Kotaro TADANO and Toshiharu KAGAWA A New, High Precision, Quick Response Pressure Regulator for Active Control of Pneumatic Vibration Isolation Tables, Precision Engineering , Vol.34, pp.43-48 (2010
  5. Tomonori KATO, Manabu ONO, Tomoaki HIGASHI, Kotaro TADANO, Kenji KAWASHIMA, Toshiharu KAGAWAProposal and Analysis of a Pneumatic Artificial Rubber Muscle with High-Damping Characteristics That Uses a Rubber BellowsJFPS International Journal of Fluid Power SystemVol.4, No.1, pp.1-7 (2011)
  6. Tomonori KATO, Takashi Owaku, Hirohisa Sakuma Toshiharu KAGAWA : Introduction of A Newly Developed Arbitrary Pressure Pulsation Generating Device for Evaluating The Characteristics of Gas Flow Meters and Sensors, JFPS International Journal of Fluid Power System, Vol.5, No.1, pp.1-7 (2012)
  7. Tomonori KATO, Genki HIGASHIJIMA, Takanori YAZAWA, Tatsuki OTUBO, Yusuke NOZAKI, Katsutoshi TANAKA : Rotation Control of Air Turbine Spindle using High Precision, Quick Response Pneumatic Pressure Regulator, JFPS International Journal of Fluid Power System, Vol.7, No.1, pp.9-15 (2014)
  8. Mitsuhiro Nakao, Tomonori Kato, Takashi Oowaku, Hirohisa Sakuma, Toshiharu Kagawa : Generation of Arbitrary Pressure Pulsation of Wide Frequency Range for Flow Meter Testing in a Laminar Gas Pipeline, Journal of Flow Control, Measurement & Visualization, Vol.2, No.4, pp.125-137 (2014)
  9. Tomonori KATO, Genki HIGASHIJIMA, Takanori YAZAWA, Tatsuki OTSUBO, Katsutoshi TANAKA : Proposal of Disturbance-Compensating and Energy-Saving Control Method of Air Turbine Spindle and Evaluation of Its Energy Consumption, Precision Engineering, Vol.43, pp.439-447 (2016)
  10. Tomonori KATO, Shunta Honda, Mingzhao CHENG, Kazuki SAKURAGI, Manabu ONO : Fabrication of a Miniature Rubber Muscle Actuator Driven by Gas-Liquid Phase Change, JFPS International Journal of Fluid Power System, Vol.9, No.1, pp.11-17 (2016)
  11. Hitoshi Kino, Nattawut Samrejfuangfoo, Kazuyuki Tsuda, Tomonori Kato, Hiroyuki Fujioka, Nobuyoshi Miyamoto : Fundamental Study of Soft Actuator Using Anisotropic Gel Hybridized with Nanosheet Liquid Crystal: Analysis of heat characteristics and length control, Journal of Procedia Computer Science (Elsevier), Vol.105, pp.62-67 (2017)
  12. Yusuke OKAMOTO, Takanori YAZAWA, Tomonori KATO, Kazuya NISHIDA, Shinya MORIYAMA, Yukio MAEDA, Tatsuki OTSUBO, Study on Tool Wear In-process Estimation for Ball End Mill using Rotation Control Air Turbine Spindle, Key Engineering Materials, Vol.749, pp.94-100 (2017)
  13. Tomonori Kato, Kenya Higashijima, Yusuke Kuradome, Kohei Noguchi and Manabu Ono : Improvement of dynamic characteristics of manipulator driven by a gas-liquid phase-change actuator using an antagonistic drive, MATEC Web of Conferences (EDP Sciences), Vol.192, p.02015 (2018)
  14. Tomonori Kato, Tatsuki Otsubo, Kohei Shimazaki, Shotaro Matsuguchi, Yusuke Okamoto, Takanori Yazawa : Tool wear estimation method in milling process using air turbine spindle rotation-control system equipped with disturbance force observer, International Journal of Hydromechatronics (Inderscience Publishers), Vol.1, No.4, pp.384-402 (2019)
  15. Kenya HIGASHIJIMA, Tomonori KATO, Kazuki SAKURAGI, Takahiro SATO, Manabu ONO : Development of Manipulator Using a Gas-Liquid Phase-Change Actuator, JFPS International Journal of Fluid Power System (J-Stage), Vol.11, No.3, pp.70-74 (2019)
  16. Hitoshi KINO, Akihiro KIYOTA, Nobuyoshi MIYAMOTO, Takumi INADOMI, Tomonori KATO, Hiroyuki FUJIOKA : Basic Study of Heating Response Measurement for Nanosheet-particles/Polymer Composite Gel Actuator with Anisotropic Contraction, Key Engineering Materials (Trans Tech Publications), Vol.804, pp.17-21 (2019)
  17. Jinhui Wang, Takanori Yazawa, Guochen Gu, Tomonori Kato, Tatsuki Otsubo : Application of Diamond Fly Cutting to Improve Form Accuracy by In-Process Measurement and Control for Ordinary Milling Machines, Applied Mechanics and Materials, Vol.894, pp.21-28 (2019)
  18. Hitoshi Kino, Akihiro Kiyota, Takumi Inadomi, Tomonori Kato, Hiroyuki Fujioka, Nobuyoshi Miyamoto : Step Response Characteristics of Anisotropic Gel Actuator Hybridized with Nanosheet Liquid Crystal, Journal of Robotics and Mechatronics (Fuji Technology Press Ltd. ), Vol.31, Vol.5, pp.647-656 (2019)

Profile Details

https://www.fit.ac.jp/research/search/profile/edit_lang_division/E/id/147