Back
Return
Biography

Dr. Mirosław Kwiatkowski

AGH University of Science and Technology, Poland

Assistant professor


Email: kwiatkow@agh.edu.pl


Qualifications

2018 D.Sc. (habilitation), Wrocław University of Technology, Faculty of Chemistry, Poland
2004 Ph.D., AGH University of Science and Technology in Kraków, Faculty of Energy and Fuels, Poland
1998 M.Sc., AGH University of Science and Technology in Kraków, Faculty of Energy and Fuels, Poland


Publications (selected)

  1. Kwiatkowski M., Fierro V. and Celzard A. (2017), Numerical studies of the effects of process conditions on the development of the porous structure of adsorbents prepared by chemical activation of lignin with alkali hydroxides, Journal of Colloid and Interface Science, 486, 277-286
  2. Kwiatkowski M. and Hameed B.H. (2017), An evaluation of the reliability of the characterization of the porous structure of activated carbons based on incomplete nitrogen adsorption isotherms, Journal of Molecular Modeling, 23, 238
  3. Kwiatkowski M., Kalderis D. and Diamadopoulos E. (2017), Numerical analysis of the influence of the impregnation ratio on the microporous structure formation of activated carbons, prepared by chemical activation of waste biomass with phosphoric acid, Journal of Physics and Chemistry of Solids, 105, 81-85
  4. Kwiatkowski M. and Broniek E. (2017), An analysis of the porous structure of activated carbons obtained from hazelnut shells by various physical and chemical methods of activation, Colloids and Surfaces A, 529, 443-453
  5. Kwiatkowski M., Sreńscek-Nazzal J. and Michalkiewicz B. (2017), An analysis of the effect of the additional activation process on the formation of the porous structure and pore size distribution of the commercial activated carbon WG-12, Adsorption, 23, 551-561
  6. Kwiatkowski M. (2017), Analysis of the microporous structure of the low-cost activated carbon fibres obtained from flax and jute cloth, Journal of Mathematical Chemistry, 55, 1893-1902
  7. Kwiatkowski M., Policicchio A., Seredych M. and Bandosz T.J. (2016), Evaluation of CO2 interactions with S-doped nanoporous carbon and its composites with a reduced GO: Effect of surface features on an apparent physical adsorption mechanism. Carbon, 98, 250-258
  8. Kwiatkowski M., Duda J.T. and Milewska-Duda J. (2014), Application of the LBET class models with the original fluid statemodel to an analysis of single, double and triple carbon dioxide, methane and nitrogen adsorption isotherms, Colloids and Surfaces A: Physicochem. Eng. Aspects, 457, 449-454
  9. Duda J.T., Milewska-Duda J., Kwiatkowski M. and Ziółkowska M. (2013), A geometrical model of random porous structures to adsorption calculations, Adsorption, 19, 545-555
  10. Kwiatkowski M. and Broniek E.  (2013), Application of the LBET class adsorption models to the analysis of microporous structure of the active carbons produced from biomass by chemical activation with the use of potassium carbonate, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 427, 47-52
  11. Kwiatkowski M. , Wiśniewski M. and Rychlicki G. (2012), The numerical analysis of the spherical carbon adsorbents obtained from ion-exchange resins in one-step steam pyrolysis, Applied Surface Science, 259, 13-20
  12. Kwiatkowski M. and Broniek E. (2012) Application of the LBET class adsorption models to analyze influence of production process conditions on the obtained microporous structure of activated carbons, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 411, 105-110
  13. Kwiatkowski M. , Wiśniewski M. and Pacholczyk A. (2011), The application of the fast multivariant fitting procedure of the LBET models to the analysis of carbon foams prepared by various methods from furfuryl alcohol, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 385, 72-84
  14. Kwiatkowski M. (2011), Analysis of relative pressure range influence on the identification quality during computer identification of adsorption system parameters by employing the new multilayer adsorption models, Applied Surface Science, 257, 8912-8922
  15. Duda J.T., Kwiatkowski M. and Milewska-Duda J. (2010), Application of clustering based gas adsorption models to analysis of microporous structure of carbonaceous materials, Applied Surface Science, 256, 5243-5248
  16. Kwiatkowski M. (2009), Use of fast multivariant identification of the parameters of adsorption systems to study the impact of activating agent on microporous structure formation during activation, Journal of Colloid and Interface Science, 340, 1-7
  17. Kwiatkowski M. (2009), Computer analysis of the microporous structure of activated carbon fibres using the fast multivariant identification procedure of adsorption system parameters, Journal of Colloid and Interface Sci., 330, 266-275
  18. Kwiatkowski M. (2008), Application of fast multivariant identification technique of adsorption systems to analyze influence of production process conditions on obtained microporous structure parameters of carbonaceous adsorbents, Microporous and Mesoporous Materials, 115, 314-331
  19. Kwiatkowski M. (2008), Application of the LBET class models to describe the structure of microporous activated carbons on the basis of argon and benzene adsorption isotherms, Adsorption 14, 37-53
  20. Kwiatkowski M. (2008), Computer analyses of new numerical methods for the description of adsorption process and the reliability of identification of microporous structure parameters, Journal of Molecular Modeling, 14, 183-200
  21. Kwiatkowski M. (2007), Computer analysis of microporous structure by employing the LBET class models with various variants of the adsorption energy distribution in comparison to the classical equations, Langmuir, 23, 2569-2581
  22. Kwiatkowski M. (2007), Numerical analysis of nitrogen adsorption isotherms on active carbons by an employment of the new LBET class models, Journal of Colloid and Interface Science, 313, 428-439
  23. Kwiatkowski M. (2007), Employing the new computer LBET class models with multivariant fitting to the analysis of single and double adsorption isotherms generated by the selected classical equations in different relative pressures, Journal of Mathematical Chemistry, 42, 815-835
  24. Kwiatkowski M. (2007), Comparison of the evaluation reliability of microporous structure parameters by employing single and double adsorption isotherms, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 294, 92-101
  25. Duda J.T., Milewska-Duda J. and Kwiatkowski M. (2005), Evaluation of adsorption energy distribution of microporous materials by a multivariant identification, Applied Surface Science, 252, 570-581
  26. Duda J.T., Kwiatkowski M. and Milewska-Duda J. (2005), Computer modeling and analysis of heterogeneous structures of microporous carbonaceous materials, Journal of Molecular Modeling, 11(4-5), 416-430
  27. Milewska-Duda J., Duda J.T., Jodłowski G., Kwiatkowski M. (2000), A model for multilayer adsorption of small molecules in microporous materials, Langmuir, 16, 7294-7303

Profile Details

https://bpp.agh.edu.pl/autor/kwiatkowski-miroslaw-03800