Dr. C.D. Eamon
Wayne State University, USA
Associate Professor, Civil and Environmental Engineering
2000 Ph.D., University of Michigan, Ann Arbor, USA, Civil Engineering
1996 M.S.E, University of Michigan, Ann Arbor, USA, Civil Engineering
1995 M.Arch, University of Michigan, Ann Arbor, USA, Architecture
1993 B.S., University of Wisconsin, Milwaukee, USA, Architecture
Eamon, C., Kamjoo, V., and Shinki, K., Design Live Load
Factor Calibration for Michigan Highway Bridges, ASCE Journal of Bridge
Engineering, Vol. 21, 2016.
Behnam, B. and Eamon, C., 2014,
Analysis of Alternative Ductile FRP Reinforcing Bar Concepts, Journal of Composite Materials, Vol. 48, pp.
C., and Jensen, E., 2012, Reliability
Analysis of Prestressed Concrete Beams Exposed to Fire, Engineering Structures,
Vol. 43, pp. 69-77.
C., Jensen, E., Grace, N., and Shi, X., 2012, Life Cycle Cost Analysis of
Alternative Reinforcement Materials for Bridge Superstructures Considering Cost
and Maintenance Uncertainties, ASCE Journal of Materials in Civil Engineering,
Vol. 24, pp. 373-380.
M, Solanki, K, Acar, E., and Eamon, C., 2010, Shape and Sizing Optimization of
Automotive Structures with Deterministic and Probabilistic Design Constraints,
International Journal of Vehicle Design, Vol. 54, pp. 309-338.
C, and Rais-Rohani, M., 2009, Integrated Reliability and Sizing Optimization of
a Large Composite Structure, Marine Structures, Vol 22, pp 315-334.
A.S., and Eamon, C., 2008, Reliability Analysis of Plank Decks, ASCE Journal of
Bridge Engineering, Vol 13, pp 540-546.
C., 2007, Reliability of Concrete Masonry Unit Walls Subjected to Explosive
Loads, ASCE Journal of Structural Engineering, Vol. 133, pp. 935-944.
M., Eamon, C., and Rais-Rohani, M., 2006, Reliability-Based Optimization of Fiber-Reinforced
Polymer Composite Bridge Deck Panels, ASCE Journal of Structural Engineering,
Vol. 132, No. 12, pp. 1898-1906.
C., Thompson, M., and Liu, Z., 2005, Evaluation of Accuracy and Efficiency of
some Simulation and Sampling Methods in Structural Reliability Analysis,
Structural Safety, Vol. 27/4, pp. 356-392.
C., Baylot, J.T, and O’Daniel, J.L., 2004, Modeling Concrete Masonry Walls
Subjected to Explosive Loads, ASCE Journal of Engineering Mechanics, Vol. 130,
and Nowak, A.S., 2004, Effect of Secondary Elements on Bridge Structural System
Reliability Considering Moment Capacity, Structural Safety, Vol. 26, pp. 29-47.
C., and Nowak, A.S., 2002, Effects of Edge-Stiffening Elements and Diaphragms
on Bridge Resistance and Load Distribution, ASCE Journal of Bridge Engineering,
Vol. 7, pp. 258-266.