WJCMP  Vol.5 No.4 , November 2015
A 3D Modelling of Solar Cell’s Electric Power under Real Operating Point
This work, based on the junction recombination velocity (Sfu) concept, is used to study the solar cell’s electric power at any real operating point. Using Sfu and the back side recombination velocity (Sbu) in a 3D modelling study, the continuity equation is resolved. We determined the photocurrent density, the photovoltage and the solar cell’s electric power which is a calibrated function of the junction recombination velocity (Sfu). Plots of solar cell’s electric power with the junction recombination velocity give the maximum solar cell’s electric power, Pm. Influence of various parameters such as grain size (g), grain boundaries recombination velocity (Sgb), wavelength (λ) and for different illumination modes on the solar cell’s electric power is studied.

Cite this paper
Dieye, M. , Mbodji, S. , Zoungrana, M. , Zerbo, I. , Dieng, B. and Sissoko, G. (2015) A 3D Modelling of Solar Cell’s Electric Power under Real Operating Point. World Journal of Condensed Matter Physics, 5, 275-283. doi: 10.4236/wjcmp.2015.54028.
[1]   Sissoko, G., Museruka, C., Correa, A., Gaye, I. and Ndiaye, A.L. (1996) Light Spectral Effect on Recombination Parameters of Silicon Solar Cell. Proceedings of World Renewable Energy Congress.

[2]   Dugas, J. (1994) 3D Modelling of a Reverse Cell Made with Improved Multicrystalline Silicon Wafer. Solar Energy Materials & Solar Cells, 32, 71-88.

[3]   Barro, F.I., Mbodji, S., Ndiaye, M., Maiga, A.S. and Sissoko, G. (2008) Bulk and Surface Recombination Parameters Measurement of Silicon Solar Cell under Constant White Bias Light. Journal des Sciences, 8, 37-41.

[4]   Nzonzolo, Lilonga-Boyenga, D. and Sissoko, G. (2014) Illumination Level Effects on Macroscopic Parameters of a Bifacial Solar Cell. Energy and Power Engineering, 6, 25-36.

[5]   Zerbo, I., Zoungrana, M., Ouedraogo, A., Korgo, B., Zouma, B. and Bathiebo, D.J. (2014) Influence of Electromagnetic Waves Produced by an Amplitude Modulation Radio Antenna on the Electric Power Delivered by a Silicon Solar Cell. Global Journal of Pure and Applied Sciences, 20, 139-148.

[6]   Madougou, S., Kaka, M. and Sissoko, G. (2010) Silicon Solar Cells: Recombination and Electrical Parameters. In: Rugescu, R.D., Ed., Solar Energy, InTech, Croatia.

[7]   Mbodji, S., Mbow, B., Barro, F.I. and Sissoko, G. (2011) A 3D Model for Thickness and Diffusion Capacitance of Emitter-Base Junction Determination in a Bifacial Polycrystalline Solar Cell under Real Operating Condition. Turkish Journal of Physics, 15, 281-291.

[8]   Skoplaki, E. and Palyvos, J.A. (2009) On the Temperature Dependence of Photovoltaic Module Electrical Performance: A Review of Efficiency/Power Correlations. Solar Energy, 83, 614-624.

[9]   Hamrouni, N., Jraidi, M. and Chérif, A. (2008) Solar Radiation and Ambient Temperature Effects on the Performances of a PV Pumping System. Revue des Energies Renouvelables, 11, 95-106.

[10]   Dinçer, F. and Meral, M.E. (2010) Critical Factors That Affecting Efficiency of Solar Cells. Journal of Smart Grid and Renewable Energy, 1, 47-50.

[11]   Ndoye, S., Ndiaye, M., Diao, A., Dione, M.M., Diarisso, D., Bama, A.O.N., Ly, I., Sow, G., Maiga, A.S., Foulani, A., Barro, F.I. and Sissoko, G. (2010) Modeling and Simuling the Powering System of a Base Transmitter Station with a Standalone Photovoltaic Generator. Proceedings of 25th European Photovoltaic Solar Energy Conference and Exhibition, 5208-5211.

[12]   Sissoko, G., Correa, A., Nanema, E., Diarra, M.N., Ndiaye, A.L. and Adj, M. (1998) Recombination Parameters Determination in a Double Sided Back-Surface Field Silicon Solar Cell. Proceedings of the World Rrenewable Energy Congress, 3, 1856-1859.

[13]   Green, M.A. and Keevers, M. (1995) Optical Properties of Intrinsic Silicon at 300K. Progress in Photovoltaics, 3, 189-192.

[14]   Diallo, H.L., Maiga, A.S., Wereme, A. and Sissoko, G. (2008) New Approach of both Junction and Back Surface Recombination Velocities in a 3D Modelling Study of a Polycrystalline Silicon Solar Cell. The European Physical Journal Applied Physics, 42, 193-211.

[15]   Mbodji, S., Ly, I., Diallo, H.L., Dione, M.M., Diasse, O. and Sissoko, G. (2012) Modeling Study of N+/P Solar Cell Resistances from Single I-V Characteristic Curve Considering the Junction Recombination Velocity (Sf). Research Journal of Applied Sciences, Engineering and Technology, 4, 1-7.

[16]   Ly, I., Ndiaye, M., Wade, M., Thiam, N., Gueye, S. and Sissoko, G. (2013) Concept of Recombination Velocity Sfcc at the Junction of a Bifacial Silicon Solar Cell, in Steady State, Initiating the Short-Circuit Condition. Research Journal of Applied Sciences, Engineering and Technology, 5, 203-208.

[17]   Madougou, S., Made, F., Boukary, M.S. and Sissoko, G. (2007) Recombination Parameters Determination by Using Internal Quantum Efficiency Data of Bifacial Silicon Solar Cells. Advanced Materials Research, 18-19, 313-324.

[18]   Cuevas, A., Luque, A., Eguren, J. and Del Alamo, J. (1982) 50 Per Cent More Output Power from an Albedo Collecting Flat Panel Using Bifacial Solar Cells. Solar Energy, 29, 419-420.

[19]   Gophen, M. (2008) Land-Use, Albedo and Air Temperature Changes in the Hula Valley (Israel) during 1946-2008. Open Journal of Modern Hydrology, 4, 101-111.

[20]   Bird, R.E. and Riordan, C. (1985) Simple Solar Spectral Model for Direct and Diffuse Irradiance on Horizontal and Tilted Planes at the Earth’s Surface for Cloudless Atmospheres. Journal of Climate and Applied Meteorology, 25, 87-97.

[21]   Madougou, S., Made, F., Boukary, M.S. and Sissoko, G. (2007) I-V Characteristics for Bifacial Silicon Solar Cell Studied under a Magnetic Field. Advanced Materials Research, 18-19, 303-312.