OJCE  Vol.4 No.3 , September 2014
Evaluation of Babolsar Sand Behaviour by Using Static Triaxial Tests and Comparison with Case History
ABSTRACT

An experimental study is carried out to investigate the static liquefaction of sand. For this purpose, Babolsar sand with its liquefiable parameters such as soil properties and high seismic level of underground water are investigated using static compression drained and un-drained tri-axial tests under isotropically and anisotropically conditions. Also, the data results of this sand are compared with those of the previous studies on soil case history. The study results indicate that Babolsar sand can experience the whole possible states of liquefaction soil, i.e. flow failure, limited and dilation behavior.



Cite this paper
Salamatpoor, S. and Salamatpoor, S. (2014) Evaluation of Babolsar Sand Behaviour by Using Static Triaxial Tests and Comparison with Case History. Open Journal of Civil Engineering, 4, 181-197. doi: 10.4236/ojce.2014.43016.
References
[1]   Castro, G. (1969) Liquefaction of Sand. Ph.D. Thesis, Division of Engineering and Applied Physics, Harvard University, Cambridge.

[2]   Casagrande, A. (1975) Liquefaction and Cyclic Deformation of Sands, a Critical Review. Proceedings of 5th Pan American Conference Soil Mechanic, Foundation Engineering, Buenos Aires, 80-133.

[3]   Castro, G. and Poulos, S.J. (1977) Factors Affecting Liquefaction and Cyclic Mobility. Journal of Geotechnical Engineering, ASCE, 103, 501-516.

[4]   Poulos, S.J. (1981) The Steady State of Deformation. Journal of Geotechnical Engineering, Div, Am, Society Civil, 107, 553-562.

[5]   Been, K. and Jefferies, M.G. (1985) A State Parameter for Sands. Géotechnique, 35, 99-112.
http://dx.doi.org/10.1680/geot.1985.35.2.99

[6]   Jafarian, Y., Ghorbani, A. and Salamatpoor, S. (2012) Experi-mental Study on Shear Resistance of Babolsar Sand under Anisotropic Consolidation. 3rd International Conference on New Developments in Soil Mechanics and Geotechnical Engineering, Cyprus.

[7]   Olson, S.M. and Stark, T.D. (2002) Liquefied Strength Ratio from Liquefaction Flow Failure Case Histories. Canadian Geotechnical Journal, 39, 629-647.
http://dx.doi.org/10.1139/t02-001

[8]   Wadell, H.A. (1932) Volume, Shape and Roundness of Rock Particles. The Journal of Geology, 40, 443-451.
http://dx.doi.org/10.1086/623964

[9]   Lade, P.V. and Duncan, J.M. (1973) Cubical Triaxial Tests on Cohesionless Soil. Journal of Soil Mechanics and Foundations, Div, ASCE, 793-812.

[10]   Sivathayalan, S. and Vaid, Y.P. (2002) Influence of Generalized Initial State and Principal Stress Rotation on the Undrained Response of Sands. Canadian Geotechnical Journal, 39, 63-76.
http://dx.doi.org/10.1139/t01-078

[11]   Poulos, S.J., Castro, G. and France, J.W. (1985) Liquefaction Evaluation Procedure. Journal of Geotechnical Engineering, 111, 772-792.
http://dx.doi.org/10.1061/(ASCE)0733-9410(1985)111:6(772)

[12]   Fear, C.E. and Robertson, P.K. (1995) Re-consideration of Initiation of Liquefaction in Sandy Soils. Journal of Geotechnical Engineering, 121, 249-261.
http://dx.doi.org/10.1061/(ASCE)0733-9410(1995)121:3(249)

[13]   Olson, S.M. and Stark, T.D. (2003) Use of Laboratory Data to Confirm Yield and Liquefied Strength Ratio Concepts. Canadian Geotechnical Journal, 40, 1164-1184.
http://dx.doi.org/10.1139/t03-058

[14]   Hanzawa, H., Itoh, Y. and Suzuki, K. (1979) Shear Character-istics of a Quick Sand in the Persian Gulf. Soils and Foundations, 19, 1-15.
http://dx.doi.org/10.3208/sandf1972.19.4_1

[15]   Sladen, J.A., D’Hollander, R.D. and Krahn, J. (1985) The Lique-faction of Sands, a Collapse Approach. Canadian Geotechnical Journal, 22, 564-578.
http://dx.doi.org/10.1139/t85-076

[16]   Vaid, Y.P. and Chern, J.C.L. (1983) Effect of Static Shear on Resistance to Liquefaction. Soils and Foundations, 23, 47-60.
http://dx.doi.org/10.3208/sandf1972.23.47

[17]   Kramer, S.L. and Seed, H.B. (1988) Initiation of Soil Liquefaction under Static Loading Conditions. Journal of Geotechnical Engineering, 114, 412-430.
http://dx.doi.org/10.1061/(ASCE)0733-9410(1988)114:4(412)

[18]   Vasquez-Herrera, A. and Dobry, R. (1989) Re-Evaluation of the Lower San Fernando Dam. Report 3. The Behavior of Undrained Contractive Sand and Its Effect on Seismic Liquefaction Flow Failures of Earth Structures. U.S. Army Corps of Engineering, Contract Report GL-89-2. US Army Corps of Engineering Waterways Experiment Station, Vicksburg.

[19]   Lade, P.V. (1992) Static Instability and Liquation of Loose Fine Sandy Slopes. Journal of Geotechnical Engineering, 118, 51-71.
http://dx.doi.org/10.1061/(ASCE)0733-9410(1992)118:1(51)

[20]   Lade, P.V. (1993) Initiation of Static Instability in the Submarine Nerlerk Berm. Canadian Geotechnical Journal, 30, 895-904.
http://dx.doi.org/10.1139/t93-088

[21]   Ishihara, K. (1993) Liquefaction and Flow Failure during Earthquake. Géotechnique, 43, 351-415.
http://dx.doi.org/10.1680/geot.1993.43.3.351

[22]   Konrad, J.M. (1993) Undrained Response of Loosely Com-pacted Sands during Monotonic and Cyclic Compression Tests. Géotechnique, 43, 69-89.
http://dx.doi.org/10.1680/geot.1993.43.1.69

[23]   Sasitharan, S., Robertson, P.K., Sego, D.C. and Morgenstern, N.R. (1993) Collapse Behavior of Sand. Canadian Geotechnical Journal, 30, 569-577.
http://dx.doi.org/10.1139/t93-049

[24]   Sasitharan, S., Robertson, P.K., Sego, D.C. and Morgenstern, N.R. (1994) State-Boundary Surface for Very Loose Sand and Its Practical Implications. Canadian Geotechnical Journal, 31, 321-334.
http://dx.doi.org/10.1139/t94-040

[25]   Konrad, J.M. (1990) Minimum Undrained Strength of Two Sands. Journal of Geotechnical Engineering, 116, 932-947.
http://dx.doi.org/10.1061/(ASCE)0733-9410(1990)116:6(932)

[26]   Canou, J., Bahda, F., Saitta, A. and Dupla, J.C. (1994) Initiation of Sand Liquefaction under Monotonic and Cyclic Loading. In: Balkema, A.A., Ed., Proceedings of the 13th International Conference on Soil Mechanics and Foundation Engineering, Vol. 3, Rotterdam, 1297-1300.

[27]   Riemer, M.F., Seed, R.B., Nicholson, P.G. and Jong, H.L. (1990) Steady State Testing of Loose Sands: Limiting Minimum Density. Journal of Geotechnical Engineering, 116, 332-337.
http://dx.doi.org/10.1061/(ASCE)0733-9410(1990)116:2(332)

[28]   Riemer, M.F. and Seed, R.B. (1992) Ob-served Effects of Testing Conditions on the Residual Strength of Loose, Saturated Sands at Large Strains. In: Hamada, M. and O’Rourke, T.D., Eds., Proceedings of the 4th Japan-US Workshop on Earthquake Resistant Design of Lifeline Facilities and Countermeasures for Soil Liquefaction, Earthquake Engineering Research Center, Technical Report NCEER-92-0019, Vol. 1, National Center for Earthquake Engineering Research (NCEER), Buffalo, 223-237.

[29]   Riemer, M.F. and Seed, R.B. (1997) Factors Affecting Apparent Position of Steady State Line. Journal of Geotechnical and Geoenvironmental Engineering, 12, 281-288.
http://dx.doi.org/10.1061/(ASCE)1090-0241(1997)123:3(281)

[30]   Chu, J. (1995) An Experimental Examination of Critical State and Other Similar Concepts for Granular Soils. Canadian Geotechnical Journal, 32, 1065-1075.
http://dx.doi.org/10.1139/t95-104

[31]   Konrad, J.M. and Pouliot, N. (1997) Ultimate State Reconstituted and Intact Samples of Deltaic Sand. Canadian Geotechnical Journal, 34, 737-748.
http://dx.doi.org/10.1139/T97-039

[32]   Konrad, J.M. (1998) Sand State from Cone Penetration Tests: A Frame-work Considering Grain Crushing Stress. Géotechnique, 48, 201-215.
http://dx.doi.org/10.1680/geot.1998.48.2.201

[33]   Kolbuszewski, J.J. (1948) An Experimental Study of the Maximum and Minimum Porosities of Sand. Proceedings of the 4th International Conference on Soil Mechanics and Foundation Engineering, Rotterdam, 21-30 June 1948, 158-165.

[34]   Bolton, M.D. (1986) The Strength and Dilatancy of Sands. Géotechnique, 36, 65-78.
http://dx.doi.org/10.1680/geot.1986.36.1.65

[35]   Seed, H.B. (1987) Design Problems in Soil Liquefaction. Journal of Geotechnical Engineering, 113, 827-845.
http://dx.doi.org/10.1061/(ASCE)0733-9410(1987)113:8(827)

[36]   Seed, R.B. and Harder, L.F. (1990) SPT-Based Analysis of Cyclic Pore Pressure Generation and Undrained Residual Strength. In: Duncan, J.M., Ed., Proceedings of the H.B. Seed Memorial Symposium, Vol. 2, BiTech Publishers, Richmond, 351-376.

[37]   Stark, T.D. and Mesri, G. (1992) Undrained Shear Strength of Liquefied Sands for Stability Analysis. Journal of Geotechnical En-gineering, 118, 1727-1747.
http://dx.doi.org/10.1061/(ASCE)0733-9410(1992)118:11(1727)

[38]   Konrad, J.M. and Watts, B.D. (1995) Undrained Shear Strength for Liquefaction Flow Failure Analysis. Canadian Geotechnical Journal, 32, 783-794.
http://dx.doi.org/10.1139/t95-076

[39]   Terzaghi, K., Peck, R.B. and Mesri, G. (1996) Soil Mechanics in Engineering Practice. 3rd Edition, John Wiley and Sons, Inc., New York.

[40]   Olson, S.M. and Stark, T.D. (2003) Yield Strength Ratio and Liquefaction Analysis of Slopes and Embankments. Journal of Geotechnical and Geoenvironmental Engineering, 129, 727-737.
http://dx.doi.org/10.1061/(ASCE)1090-0241(2003)129:8(727)

[41]   Skempton, A.W. (1986) Standard Penetration Test Procedures and the Effects in Sand of Overburden Pressure, Relative Density, Particle Size, Ageing and Overconsolidation. Géotechnique, 36, 425-447.
http://dx.doi.org/10.1680/geot.1986.36.3.425

[42]   Kulhawy, F.H. and Mayne, P.W. (1990) Manual on Estimating Soil Properties for Foundation Design. Electric Power Research Institute EL-6800, Project 1493-6, Electric Power Research Institute, Palo Alto, Calif.

[43]   Davies, M.P. and Campanella, R.G. (1994) Selecting Design Values of Un-drained Strength for Cohesionless Soils. In: Proceeding of the 47th Canadian Geotechnical Conference, Vol. 1, BiTech Publishers, Richmond, 176-186.

[44]   Baziar, M.H. and Dobry, R. (1995) Residual Strength and Large Deformation Potential of Loose Silty Sands. Journal of Geotechnical Engineering, 121, 896-906.
http://dx.doi.org/10.1061/(ASCE)0733-9410(1995)121:12(896)

 
 
Top