NS  Vol.5 No.9 , September 2013
The study of formulation and performance of formate drilling and completion fluid system
ABSTRACT

Formate drilling and completion fluid system is a new type of clean organic salt brine system which has been developed from inorganic salt brine drilling fluid system. It is beneficial to protecte and find hydrocarbon reservoir. Due to the solid free system, the damage of solid phase particles on reservoir, especially low permeability oil and gas layer, can be greatly eliminated, at the same time, drilling fluid and completion fluid have greater compatibility. It will avoid that precipitation which is not compatible with drilling and completion fluid and generates damages on reservoir. And because mud cake of the solid free system is thin and resilient, it is conductive to improve cementing quality greatly. Experiments show that the formate drilling and completion system has good rheological property, strong inhibition ability, good lubricating performance, good compatibility with reservoir rocks and formation water at high temperature.


Cite this paper
Wang, B. , Wang, Z. , Sun, Y. and Sun, J. (2013) The study of formulation and performance of formate drilling and completion fluid system. Natural Science, 5, 997-1000. doi: 10.4236/ns.2013.59122.
References
[1]   Gao, P. and Yin, D. (2006) Simulation study on the conditions of converting injection wells to production wells in low permeability reservoirs. Journal of Daqing Petroleum Institute, 6, 12-22.

[2]   Wang, W., Pu, H., Yin, D. and Gao, P. (2006) The study on reasonable infilling method for low permeability reservoir. Small Hydrocarbon Reservoirs, 12, 298-310.

[3]   Gao, P. and Towler, B. (2010) Strategies for evaluation of the CO2 miscible flooding process. SPE-138786, Conference of 2010 Abu Dhabi International Petroleum Exhibition, Abu Dhabi, 1-4 November 2010, 10 p.

[4]   Gao, P., Towler, B. and Jiang, H. (2010) Feasibility investigation of CO2 miscible flooding in south slattery minnelusa reservoir, Wyoming. SPE-133598, 2010 SPE Western North American Regional Meeting, 27-29 May 2010, Anaheim, 4-14.

 
 
Top