Return
Biography
Khaled A. Sallam

Dr. Khaled A. Sallam

Mechanical and Aerospace Engineering

Oklahoma State University, USA.

Assistant Professor

 

Email: khaled.sallam@okstate.edu

 

Qualifications

2002  Ph.D., Aerospace Engineering, University of Michigan, USA.

2000  M.Sc., Aerospace Engineering, University of Michigan, USA.

1993  B.Sc., Mechanical Power Engineering, Cairo University, Egypt.

 

Publications

  1. Osta, A.R., Lee, J., Sallam, K.A., and Fezzaa, K., “Study of the Effects of the Injector Length/Diameter ratio on the Surface Properties of Turbulent Liquid Jets in Still Air using X-ray Imaging,” IJMF, In press.
  2. Osta, A.R., and Sallam, K.A., (2010) “The Effect of Nozzle Geometry on the Upwind Surface Properties of Turbulent Liquid Jets in Gaseous Crossflow,” J. Prop. Power, vol. 26, no. 5, pp. 936-946.
  3. Shukla, R. and Sallam, K.A., (2009) “Effect of Liquid Transparency on Laser-Induced motion of Drops,” J. Fluids Engineering, Vol. 131, No. 8, 081301-1 – 081301-7.
  4. Lee, J., Sallam, K.A., Lin, K.-C., and Carter, C.D., (2009), “Spray Structure in Near-Injector Region of Aerated Jet in Subsonic Crossflow,” J. Prop. Power, Vol. 25, No. 2, pp. 258-266.
  5. Lee, J., Miller, B., and Sallam, K.A., (2009), “Demonstration of Digital Holographic Diagnostics for the Breakup of Liquid Jets Using a Commercial-Grade CCD Sensor,” Atom. Sprays, Vol. 19, No. 5, pp. 445-456.
  6. Miller, B., Sallam, K.A., Bingabr, M., Lin, K.-C., and Carter, C.D., (2008), “Breakup of Aerated Liquid Jets in Subsonic Crossflow,” J. Prop. Power, Vol. 24, No. 2, pp. 253-258.
  7. Ng, C.-L., Sankarakrishnan, R., and Sallam, K.A., (2008), “Bag Breakup of nonturbulent liquid jets in crossflow,” Int. J. Multiphase Flow, Vol. 34, No. 3, pp. 241-259.
  8. Lee, K., Aalburg, C., Diez, F.J., Faeth, G.M., and Sallam, K.A., (2007), “Primary Breakup of Turbulent Round Liquid Jets in Uniform Crossflows,” AIAA Journal, Vol. 45, No. 8, pp. 1907-1916.
  9. Sallam, K.A., Aalburg, C., Faeth, G.M., Lin, K.-C., Carter, C.D., and Jackson, T.A., (2006), “Primary Breakup of Aerated-Liquid Jets in Supersonic Crossflows,” Atomization and Sprays, Vol. 16, No. 6, pp. 657-672.
  10. Aalburg, C., Van Leer, B., Faeth, G.M., and Sallam, K.A., (2005), “Properties of Nonturbulent Round Liquid Jets in Uniform Gaseous Crossflows,” Atomization and Sprays, Vol. 15 No. 3, pp. 271-294.
  11. Sallam, K.A., Aalburg, C., and Faeth, G.M., (2004), “Breakup of Round Liquid Jets in Gaseous Crossflows,” AIAA Journal, Vol. 42, No. 12, pp. 2529-2540.
  12. Sallam, K.A., and Faeth, G.M., (2003), “Surface Properties during Turbulent Primary Breakup of free Liquid Jets,” AIAA Journal, Vol. 41, pp. 1514-1524. Curriculum Vitae: Khaled A. Sallam Page 7/12
  13. Sallam, K.A., Dai, Z., and Faeth, G.M., (2002), “Liquid Breakup at the Surface of Turbulent Round Liquid Jets in Still Gases,” International Journal of Multiphase Flow, Vol. 28, pp. 427-449.
  14. Sallam, K.A., Dai, Z., and Faeth, G.M., (1999), "Drop Formation at the Surface of Plane Turbulent Liquid Jets in Still Gases," International Journal of Multiphase Flow, Vol. 25, pp. 1161-1180.